Flyin Optronics' SFP transceivers are high performance, cost effective modules supporting data-rate of 155M-4.25Gbps and 300m-120km transmission distance.

Flyin Optronics' 10Gigabit SFP+ transceiver is designed to transmit and receive optical data over MMF/SMF . The SFP+ module electrical interface is compliant to SFI electrical specifications.

Flyin Optronics’ XFP Transceivers are Small Form Factor 10Gbps (XFP) transceivers and compliant with the current XFP Multi-Source Agreement (MSA) Specification. They comply with 10-Gigabit Ethernet 10GBASE-ZR/ZW per IEEE 802.3ae.Digital diagnostics functions are available via a 2-wire serial interface, as specified in the XFP MSA. The transceiver is RoHS compliant and leads free per Directive 2002/95/EC3.

Flyin’s FYQXP-27A4-10BD is designed to operate over single-mode fiber system using 4X10 CWDM channel in 1310 band and links up to 10km. The module converts 4 inputs channel of 10Gb/s electrical data to 4 CWDM optical signals, and multiplexes them into a single channel for 40Gb/s optical transmission. Reversely, on the receiver side, the module optically de-multiplexes a 40Gb/s input into 4 CWDM channels signals, and converts them to 4 channel output electrical data.

Flyin Optronics' BIDI SFP transceivers are high performance, cost effective modules supporting data-rate of 155M-2.5Gbps and 300m-120km transmission distance.

Flyin Optronics’ BIDI SFP+ Transceivers are Small Form Factor transceiver module. It designed expressly for high-speed communication applications that require rates up to 10.7Gbps,it designed to be compliant with SFF 8472 and SFP+ MSA. The module data link up to 10km or 40km in 9/125um single mode fiber. The optical output can be disabled by a LVTTL logic high-level input of Tx Disable. Tx Fault is provided to indicate that degradation of the laser. Loss of signal (LOS) output is provided to indicate the loss of an input optical signal of receiver or the link status with partner.