Flyin Optronics Co.,Ltd

World's Leading Fiber Optic Components Manufacturer

Home

Optical Transceiver

100G Optical Transceiver

100Gb/s 10KM CFP2 Optical Transceiver

100Gb/s 10KM CFP2 Optical Transceiver

Data Rate:

100Gbps

Distance:

10km

Connector:

LC

DDM:

Yes

No

Wavelength:

1296.56/1300.05/1304.58/1309.14

Reply Within 12 Hours

Description

Parameters

PDF

Features
Direct LC receptacle optical interface
Single +3.3V power supply
Hot-pluggable
Operating optical data rate up to 112Gbps
Operating electrical serial data rate up to 27.952493Gbps
4 parallel electrical serial interface
Transmission distance up to 10km
AC coupling of CML signals
1310 nm window cooled EA-DFB LD
PIN ROSA
Low power dissipation(Max:12W)
Built in digital diagnostic function
Operating case temperature range:0℃ to 70℃
Compliant with RoHS
MDIO Communication Interface
Applications
OTN-OTU4
Switch to switch interface
Switch to router interface
P to P Access Network
Standards
Compliant with IEEE 802.3ba
Compliant with CFP2 MSA hardware specification,Version1.0 July 31,2014
Compliant with CFP MSA management specification,Version2.2July 01, 2013
Compliant with ITU-T G.959.1
Compliant with RoHS & WEEE

Package outline

The production workshop show

Ordering Information

Part Number Product Description
FYCP2-4LO4-10BD CFP2: 1310nm-LAN-Cooled-EMA DFB-LD, 103.125Gbps, 10km, 0ºC ~ +70ºC, Ethernet Version, DDM

Absolute Maximum Ratings

Parameter Symbol Min Max
Storage Temperature Range(℃) Ts -40 +85
Relative Humidity(%) RH 5 85
Power Supply Voltage(V) Vcc -0.5 +3.6
Operating Case Temperature Range(℃) Tc -5 +75
Receiver Damage Threshold Per Lane(dBm) Pdag +5.5 -

Recommended Operating Conditions

Parameter Symbol Min Typ Max
Operating Case Temperature Range(℃) Tc 0 70
Power Supply Voltage(V) Vcc 3.2 3.3 3.4
Data rate(Gb/s) 103.125 112

Specifications (tested under recommended operating conditions, unless otherwise noted)

Parameter Symbol Min Typ Max Notes
Voltage Supply Electrical Characteristics
Supply Current(A) Tx Section Icc - - 3.5 1
Rx Section
Power Supply Noise Vrip 2% DC-1MHz
3% 1-10MHz
Dissipation(W) Class5 Pw 12
Low Power Dissipation(W) Plow 2
Inrush Current(mA/usec) Class5 I-inrush 200
Turn-off Current(mA/usec) I-turnoff -200
Different Signal Electrical Characteristics
Single Ended Data Input Swing(mV) 55 - 525
Single Ended Data Output Swing(mV) 150 - 500
Differential Signal Output Resistance(Ω) 80 120
Differential Signal Input Resistance(Ω) 80 120
3.3V LVCMOS Electrical Characteristics)
Input High Voltage(V) 3.3VIH 2.0 - Vcc+0.3
Input Low Voltage(V) 3.3VIH -0.3 - 0.8
Input Leakage Current(uA) 3.3IIN -10 - +10
Output High Voltage (IOH=100uA)(V) 3.3VOH Vcc-0.2 - -
Output Low Voltage (IOL=100uA)(V) 3.3VOH - 0.2
Minimum Pulse Width of Control Pin Signal(us) t_CNTL 100
1.2V LVCMOS Electrical Characteristics
Input High Voltage(V) 1.2VIH 0.84 1.5
Input Low Voltage(V) 1.2VIL -0.3 0.36
Input Leakage Current(uA) 1.2IIN -100 +100
Output High Voltage(V) 1.2VOH 1.0 1.5
Output High Current(mA) 1.2IOH -4
Output Low Current(mA) 1.2IOL +4
Input Capacitance(pF) Ci +4 10
Optical transmitter Characteristics
Signaling Rate for Each Lane(100GbE)(Gbps) - 25.78125
Signaling Rate for Each Lane(OTU4)(Gbps) - 27.95249
Four Lane Wavelength Range(nm) λ1 1294.53 1295.56 1296.59
λ2 1299.02 1300.05 1301.09
λ3 1303.54 1304.58 1305.63
λ4 1308.09 1308.09 1310.19
Side Mode Suppression Ratio(dB) SMSR 30 -
Total Average Launch Power(dBm) Pt - 10.5
Average Launch Power for Each Lane(100GbE)(dBm) Pa -4.3 +4.5 2
Average Launch Power for Each Lane(OTU4)(dBm) -2.9 +4.5
Optical Modulation Amplitude for Each Lane(dBm) OMA -1.3 4.5 3
Transmitter and Dispersion Penalty for Each Lanes(TDP) 2.2
Extinction Ratio (100GbE)(dB) EX 4
Extinction Ratio (OTU4)(dB) 7
RIN20OMA(dB/Hz) -130
Optical Return Loss Tolerance(dB) 20
Transmitter Reflectance(dB) -12
Eye Diagram Compliant with IEEE 802.3ba-LR4/OTU4
Optical receiver Characteristics
Signaling Rate for Each Lane(100GbE)(Gbps) - 25.78125
Signaling Rate for Each Lane(OTU4)(Gbps) - 27.95249
Four Lane Wavelength Range(nm) λ1 1294.53 1295.56 1296.59
λ2 1299.02 1300.05 1301.09
λ3 1303.54 1304.58 1305.63
λ4 1308.09 1308.09 1310.19
Overload Input Optical Power(dBm) Pmax 5.5 5
Average Receive Power for Each Lane(100GE)(dBm) Pa -10.6 4.5 6&7
Average Receive Power for Each Lane(OTU4 with Tx ER of 4 to 6.5 dB)(dBm) Pa -6.9 4.0
Average Receive Power for Each Lane(OTU4 with Tx ER > 7 dB) -8.8 2.9
Receive Power In OMA for Each Lane(dBm) PinOMA - 4.5
Difference in Receive Power between Any Two Lanes(dBm) - 5.5
Receiver Sensitivity in OMA for Each Lane(100GbE) at BER= 1x10^–12(dBm) SOMA - -8.6 8
Equivalent receiver sensitivity (OTU4 with Tx ER of 4 to 6.5 dB)(dBm) SAVG -8.4 9
Equivalent receiver sensitivity (OTU4 with Tx ER > 7 dB) -10.3 9
Stressed Receiver Sensitivity in OMA for Each Lane(100GbE)(dBm) -6.8 10&11
Los Assert(dBm) -25 -13.6
Los De-assert(dBm) -11.3
Los Hysteresis(dBm) 0.5

Notes:

1.The supply current includes CFP2 module’s supply current and test board working current.

2.Average launch power, each lane (min) is informative and not the principal indicator of signal strength. A transmitter with launch power below this value cannot be compliant; however, a value above this does not ensure compliance

3.Even if the TDP<1dB, the OMA (min) must exceed this value

4.Transmitter reflectance is defined looking into the transmitter

5.The receiver shall be able to tolerate, without damage, continuous exposure to an optical input signal having this average power level

6.Minimum average receive power and maximum receiver sensitivity (OMA), each lane, is informative for 100GBase-LR4

7.Average receive power, each lane (min) is informative and not the principal indicator of signal strength. A received power below this value cannot be compliant; however, a value above this does not ensure compliance

8.Receiver sensitivity (OMA), each lane (max) is informative

9.Measured with PRBS 231-1 for BER=10-5. The BER for the OTU4 application is required to be met only after FEC has been applied.

10.Measured with conformance test signal at TP3 for BER=10-12

11.Conditions of stressed receiver sensitivity test: vertical eye closure penalty for each lane is 1.8dB; stressed eye J2 jitter for each lane is 0.3UI; stressed eye J9 jitter for each lane is 0.47UI.

DownLoad

Copyright © 2012-2016 Flyin Optronics Co.,Ltd. All Rights Reserved.