Flyin Optronics Co.,Ltd

World's Leading Optical Devices Manufacturer

Current Position: >Media convertor >Industrial >10/100M Media Converter
10/100M Media Converter

Flyin Optronics’ FM-11 series Ethernet media converter can interconvert electrical signals of 10Base-T and 100Base-TX twisted pairs with optical signals of 100Base-FX. It extends the network transmission distance from 100m via copper cables to 120km via fiber optical cable. It enables the data to transmit in two different mediums of electrical and optical networks either by the technology of data link L2 store-and-forward, or by the one of PHY L1 cut-through). It supports transmission in multi-mode dual fiber, single-mode dual fiber, single-mode single fiber.

Connector:

SC

SC/ST

SC/FC

TX Port:

SFP

RJ45

Fiber Mode:

MM/Duplex

SM/Duplex

SM/BI-DI

Distance:

20km

40km

80km

Model:

FM-1101-L2A

FM-1101-L2B

FM-1101-L4A

FM-1101-L4B

FM-1101-L8A

FM-1101-L8B

Wavelength:

850nm/1310nm

1310nm

1550nm

T1310nm/R1550nm

T1550nm/R1310nm

Reply Within 12 Hours

Description

Parameters

PDF

FeaturesApplications
0/100Mbps auto-sensed, facilitating network upgrade10/100Mbps fast optical Ethernet long-distance transmitting network
Built-in efficient switching core to implement flow control and reduce broadcast packets
Full-duplex and half-duplex auto-sensed
Supporting automatic cross connection of twisted pair interfaces, facilitating system commissioning and installation
Supporting Link Failure Alert (LFA) with optional dip-switch(unique)
Supporting half /full-duplex of FX and link failure alert with optional dip-switch
Supporting 10/100Mbps store-and-forward and 100Mbps cut-through transmission with optional dip-switch(unique)
Supporting low-timelag transmission
Supporting the transmission of extra-long VLAN packets
Supporting the transmission of extra-long packets up to1600 bytes
Supporting Quality of Service (QoS) , ensuring the transmission of VoIP packets
Supporting STP to form a redundant network
Extremely low power consumption (less than 2W), low heat, reliable and stable performance,and long lifetime

The production workshop show

Ordering Information

ParameterSpecifications
Access mode10/100Mbps
StandardIEEE802.3 10Base-T, IEEE802.3u 100Base-TX ,100Base-FX ;
WavelengthMulitmode:850/1310nm; Single-mode:1310/1550nm (Option)
DistanceCategory-5 twisted pair: 100m
Fiber:multi-mode 50/125,62.5/125μm(the max distance up to 2km or 5km)
Fiber:Single -mode 8/125,8.7/125,9/125,10/125μm(the max distance up to 20 -120km)
PortOne RJ45 port: 
For connecting STP/UTP category-5 twisted pairs
One optical port:
Multi-mode, dual fiber: SC or ST (50, 62.5/125μm)
Single mode, dual fiber: SC or FC (9/125μm)
Single mode Single fiber: SC or FC (9/125μm)
Conversion meansMedia conversion, store-and-forward/cut-through
MAC address table1K
Buffer space1Mbit
Flow controlFull duplex: flow control;
Half duplex: back pressure
DelayStore-and-forward: 9.6μs; cut-through: 0.9μs
BER<19-9
MTBF100,000 hours
LED indicatorPWR (power supply)
FX LINK/ACT (optical link/action)
FDX (FX full duplex), TP LINK/ACT (twisted pairs link/action)
TP 100 (100M transmission rate of twisted pairs)
FX 100 (100M transmission rate of optical fiber)
Power supplyDC5V 1A (external), AC220 0.5A/DC-48 (internal)
Power consumption<2W
Operating temperature-10~55℃
Operating humidity5%~90%
Maintaining temperature-40~70℃
Maintaining humidity5% ~ 90% non-condensing
Dimensions71mm(W)*94mm(D)*26mm(H)(external power supply)

Ordering Information

ModelwavelengthConnectorTX PortFiber TypeTX Power (dBm)RX Sen.(dBm)Distance
FM-1101-L2AT1310/R1550SCRJ-45SM,BI-DI-13 to -8≤-3620km
FM-1101-L2BT1550/R1310SCRJ-45SM,BI-DI-13 to -8≤-3620km
FM-1101-L4AT1310/R1550SCRJ-45SM,BI-DI-8 to -3≤-3640km
FM-1101-L4BT1550/R1310SCRJ-45SM,BI-DI-8 to -3≤-3640km
FM-1101-L8AT1310/R1550SCRJ-45SM,BI-DI-5 to -3≤-3680km
FM-1101-L8BT1550/R1310SCRJ-45SM,BI-DI-5 to -3≤-3680km


Specification

No file

Recent browsing of products

Copyright © 2012-2016 Flyin Optronics Co.,Ltd. All Rights Reserved.